1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

Center link?

Thread Tools
 
Search this Thread
 
Old Jan 23, 2012 | 01:17 PM
  #1  
InnerCityHillBilly's Avatar
InnerCityHillBilly
Thread Starter
|
Veteran
Joined: Aug 2010
Posts: 403
Likes: 0
From: Columbus, Ohio
Default Center link?

need to replace the center link and all of the steering components on my truck, but i cant find s center link on advanceauto or autozone's website.
is there another name to look under or does anyone have a place that i should look for one
 
Reply
Old Jan 24, 2012 | 02:13 AM
  #2  
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,923
Likes: 19
From: NM
Default

The parts manual says " Part number# 4147439 LINK, Center" Try www.dodgeparts.com
 
Reply
Old Jan 24, 2012 | 06:19 PM
  #3  
InnerCityHillBilly's Avatar
InnerCityHillBilly
Thread Starter
|
Veteran
Joined: Aug 2010
Posts: 403
Likes: 0
From: Columbus, Ohio
Default

are the upper and lower ball joints in the front press in type? Not familiar with ball joints
 
Reply
Old Jan 24, 2012 | 08:02 PM
  #4  
crazyjerry's Avatar
crazyjerry
Professional
Joined: Oct 2011
Posts: 196
Likes: 2
Default

have you not dload the service manual yet ????????????? should of been first thing you do. some years are screw in at the top and press in at the bottom. not sure on '93
 
Reply
Old Jan 24, 2012 | 10:57 PM
  #5  
InnerCityHillBilly's Avatar
InnerCityHillBilly
Thread Starter
|
Veteran
Joined: Aug 2010
Posts: 403
Likes: 0
From: Columbus, Ohio
Default

downloading the 1990-1993 parts manual right now
 
Reply
Old Jan 25, 2012 | 02:16 AM
  #6  
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,923
Likes: 19
From: NM
Default

Upper control arm ball joints will screw in, Lower control arm ball joints will press in, for 2wd and 4wd.
 
Reply




All times are GMT -4. The time now is 03:50 PM.