88 4x4 with a999 AT
Thread Starter
|
Veteran
Joined: Mar 2005
Posts: 354
Likes: 0
From: AZ and Utah
88 4x4 with a999 AT
Got this today, and it appears to be an oddity, it is 3.55 ratio axles without the OD trans.
Has over 200K miles on it, will dump the v6 and transfer case and auto trans, put in a 318, a999 (2wd), and 2.9 SG rear end...
Has over 200K miles on it, will dump the v6 and transfer case and auto trans, put in a 318, a999 (2wd), and 2.9 SG rear end...
Thread Starter
|
Veteran
Joined: Mar 2005
Posts: 354
Likes: 0
From: AZ and Utah
will do.....hopefully someone here can ID the alloy wheels on it....nice 15x7 with 10mm offset.
It came with a fiberglas shell, nice wheels, bad tires....and the passenger side front axle shaft missing.
When I saw it had no OD, I thought it must be an 87 so I pulled the air cleaner, and found TBI, so apparently in 88 you could get either OD auto or regular auto trans...
got it for $500....it will be my AZ project, the thing I need to keep from watching too much TV...
It came with a fiberglas shell, nice wheels, bad tires....and the passenger side front axle shaft missing.
When I saw it had no OD, I thought it must be an 87 so I pulled the air cleaner, and found TBI, so apparently in 88 you could get either OD auto or regular auto trans...
got it for $500....it will be my AZ project, the thing I need to keep from watching too much TV...
Last edited by bill55az; Mar 29, 2012 at 10:48 PM.
