1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

94Dak 3.9 AC

Thread Tools
 
Search this Thread
 
Old Jun 9, 2015 | 06:33 PM
  #1  
onemore94dak's Avatar
onemore94dak
Thread Starter
|
Champion
Photogenic
Photoriffic
Shutterbug
Joined: Sep 2013
Posts: 2,724
Likes: 153
Default 94Dak 3.9 AC

Hi, I have pressure coming out the Schraeder valve (no gauge) and the compressor cycles on and off every 10 seconds or so. Warm air only coming out the vents. Does the TSB 24-6-92 apply to the 94 Dak? edit I just realised that if it is sitting still and blowing warm air its probably not the Vacuum line issue I had thought it might be. What does the symptoms I describe indicate other than take it to a shop?
 

Last edited by onemore94dak; Jun 9, 2015 at 06:36 PM.
Reply
Old Jun 10, 2015 | 03:26 PM
  #2  
onemore94dak's Avatar
onemore94dak
Thread Starter
|
Champion
Photogenic
Photoriffic
Shutterbug
Joined: Sep 2013
Posts: 2,724
Likes: 153
Default

I forgot to mention that the truck never had AC from when I bought it. I was working on getting it running right and finally had the tranny rebuilt last fall. OK on the AC. I decided that I needed to test it to see if it worked at all. I got an 18oz can of 134A at Harbor Freight which came with a gauge on the filler head not unlike the AC Pro setup with a much shorter tube. When the can was almost empty the compressor started kicking on for longer bits then stayed on and I had cold air. I have since added a 12 oz can to be sure its full as the gauge indicated it could use more. It has gotten colder. I suspect a leak IDK how big but I will probably get it in for inspection depending on how long this cold air lasts. It is possible the guy I bought it from never maintained it as he had no explanation for why it did not work. I had difficulty figuring this out so to save anyone who reads this trouble. The 94 V63.9L Magnum AC connectors, the low pressure connector is in front of the passenger side wheel well left of the coolant overflow above the air intake. If you do not know or are not sure the connectors for high and low pressure are of different sizes and store bought refill can connectors will only fit on the low pressure side.
 

Last edited by onemore94dak; Jun 11, 2015 at 01:22 PM.
Reply
Old Jun 17, 2015 | 07:31 PM
  #3  
onemore94dak's Avatar
onemore94dak
Thread Starter
|
Champion
Photogenic
Photoriffic
Shutterbug
Joined: Sep 2013
Posts: 2,724
Likes: 153
Default

There is something going off. The motor starts lugging randomly when the AC is on. How does one test for that?
 

Last edited by onemore94dak; Jun 22, 2015 at 11:39 AM.
Reply
Old Jun 30, 2015 | 12:32 AM
  #4  
Thomas_kota's Avatar
Thomas_kota
Rookie
Joined: Oct 2014
Posts: 61
Likes: 0
From: Vancouver Island BC
Default

Originally Posted by onemore94dak
There is something going off. The motor starts lugging randomly when the AC is on. How does one test for that?
Is the compressor easy to turn over by hand? You should be able to turn the a/c compressor fairly easily, but you will also feel it like pumping. (Obviously engine not running...)
 
Reply
Old Jul 5, 2015 | 06:44 PM
  #5  
onemore94dak's Avatar
onemore94dak
Thread Starter
|
Champion
Photogenic
Photoriffic
Shutterbug
Joined: Sep 2013
Posts: 2,724
Likes: 153
Default

Originally Posted by Thomas_kota
Is the compressor easy to turn over by hand? You should be able to turn the a/c compressor fairly easily, but you will also feel it like pumping. (Obviously engine not running...)
Seems like its doing ok now. I think what I felt was issues caused by the recent tranny rebuild.
 
Reply




All times are GMT -4. The time now is 12:49 AM.