1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

Schematic needed: 1991 5.2/318 auto 4x4

Thread Tools
 
Search this Thread
 
Old Aug 13, 2017 | 08:18 PM
  #1  
bigdumbloser's Avatar
bigdumbloser
Thread Starter
|
Rookie
Joined: Nov 2013
Posts: 61
Likes: 0
From: Near Calgary, Alberta
Default Schematic needed: 1991 5.2/318 auto 4x4

I need the portions from the factory TSM that cover the fuse/relay/bus box by the driver's side shock tower. The Haynes drawings just aren't accurate enough, I checked the FAQ, and am in a time crunch.

Can anyone share it with me?

Thanks very much.
 
Reply
Old Aug 14, 2017 | 07:15 AM
  #2  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,204
Likes: 363
From: Winston Salem, NC
Default

Tried googling?
 
Reply
Old Aug 14, 2017 | 10:36 AM
  #3  
onemore94dak's Avatar
onemore94dak
Champion
Photogenic
Photoriffic
Shutterbug
Joined: Sep 2013
Posts: 2,724
Likes: 153
Default

The FAQ page is your friend.
 
Reply
Old Aug 14, 2017 | 04:17 PM
  #4  
bigdumbloser's Avatar
bigdumbloser
Thread Starter
|
Rookie
Joined: Nov 2013
Posts: 61
Likes: 0
From: Near Calgary, Alberta
Default

Originally Posted by jkeaton
Tried googling?
Of course. Many hits, none that I can confirm are right for this truck. One that appeared to be a good bet didn't check out when I examined the fuse designations and wire colours.
 
Reply
Old Aug 14, 2017 | 04:18 PM
  #5  
bigdumbloser's Avatar
bigdumbloser
Thread Starter
|
Rookie
Joined: Nov 2013
Posts: 61
Likes: 0
From: Near Calgary, Alberta
Default

Originally Posted by onemore94dak
The FAQ page is your friend.
Not for this, it isn't. As I said in my original post, I looked. Of course, if I just missed it in there perhaps you could point it out to me.
 
Reply
Old Aug 16, 2017 | 11:53 AM
  #6  
onemore94dak's Avatar
onemore94dak
Champion
Photogenic
Photoriffic
Shutterbug
Joined: Sep 2013
Posts: 2,724
Likes: 153
Default

Originally Posted by bigdumbloser
Not for this, it isn't. As I said in my original post, I looked. Of course, if I just missed it in there perhaps you could point it out to me.
Apparently the pictures are gone now. botophucket is charging $400 per year to host pics now so I figure that is where those diagrams originated. Maybe contact the mod who posted them? I may be remembering incorrectly but I think they showed a diagram of the fuse box
 
Reply
Old Aug 16, 2017 | 03:54 PM
  #7  
robertmee's Avatar
robertmee
Record Breaker
Joined: Aug 2013
Posts: 1,033
Likes: 1
Default

NM....
 

Last edited by robertmee; Aug 16, 2017 at 03:58 PM.
Reply
Old Aug 17, 2017 | 12:52 PM
  #8  
bigdumbloser's Avatar
bigdumbloser
Thread Starter
|
Rookie
Joined: Nov 2013
Posts: 61
Likes: 0
From: Near Calgary, Alberta
Default

Originally Posted by robertmee
NM....
Huh ?
 
Reply
Old Aug 17, 2017 | 05:02 PM
  #9  
robertmee's Avatar
robertmee
Record Breaker
Joined: Aug 2013
Posts: 1,033
Likes: 1
Default

Originally Posted by bigdumbloser
Huh ?
"Nevermind"...I had linked some schematics but realized they were the interior fuses, not the shock tower fuse box.
 
Reply




All times are GMT -4. The time now is 12:57 AM.