1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

brakes apply by there self

Thread Tools
 
Search this Thread
 
Old Jan 10, 2018 | 10:12 PM
  #1  
leestag's Avatar
leestag
Thread Starter
|
Registered User
Joined: Jan 2018
Posts: 1
Likes: 0
Default brakes apply by there self

i have a 1992 dodge dakota after driving a few miles the brakes apply there self without pressing the pedal and then after driving a few more miles they release then they may or may not do it again before i return home .ive replaced master cylinder .calipers,the brakes linesrotors and pads any suggestions
 
Reply
Old Jan 10, 2018 | 11:07 PM
  #2  
tbugden's Avatar
tbugden
All Star
Joined: Apr 2013
Posts: 941
Likes: 22
From: Connecticut
Default

Take it on a back road where you won't have to do an emergency stop. Let them grab then get out and disconnect the vacuum line from the brake booster and see if releases. If so you need a brake booster. Easy replace and if I recall right you can squeeze it out without removing the lines from the MC. Good luck.
 
Reply
Old Jan 13, 2018 | 10:43 AM
  #3  
volaredon's Avatar
volaredon
Record Breaker
15 Year Member
Liked
Loved
Community Favorite
Joined: Apr 2010
Posts: 1,745
Likes: 50
Default

theres nothing on the brakes? Like axle fluid or brake fluid?
 
Reply




All times are GMT -4. The time now is 07:52 PM.