How To Change Check Engine Bulb
#1
07-20-2019, 09:18 AM
Join Date: Jul 2019
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
#2
07-20-2019, 09:24 AM
Champion
*blink*
Like any other bulb.
Remove knee guard under steering column.
Remove dash surround.
If automatic, carefully remove wire from steering column to PRNDL.
Remove instrument cluster (note: Try pulling it out carefully until you can either reach the socket, or until you can release the speedometer cable on a 1993 or earlier; 1994-1996 use an electronic speedo, so that isn't needed there.)
Twist the socket 1/4 turn, remove socket.
Pull bulb out.
Put new bulb in. Note: If you are installing a LED, carefully verify polarity.
Reverse the above.
Option 2: Instead of removing instrument cluster, remove clear lens cover; then pull the bulb out the front and insert the new bulb.
I suggest some dielectric grease ("bulb grease") to help knock possible oxidation down.
RwP
Like any other bulb.
Remove knee guard under steering column.
Remove dash surround.
If automatic, carefully remove wire from steering column to PRNDL.
Remove instrument cluster (note: Try pulling it out carefully until you can either reach the socket, or until you can release the speedometer cable on a 1993 or earlier; 1994-1996 use an electronic speedo, so that isn't needed there.)
Twist the socket 1/4 turn, remove socket.
Pull bulb out.
Put new bulb in. Note: If you are installing a LED, carefully verify polarity.
Reverse the above.
Option 2: Instead of removing instrument cluster, remove clear lens cover; then pull the bulb out the front and insert the new bulb.
I suggest some dielectric grease ("bulb grease") to help knock possible oxidation down.
RwP