1994 dakota mods Advice
Thread Starter
|
Registered User
Joined: Jan 2018
Posts: 5
Likes: 0
1994 dakota mods Advice
Hello all,
I have a 1994 Dakota 5.2 it has a 52mm tb and a set of 1.7 hs rockers and an obd1 MP computer.
I managed to pick up a Mopar m1 2bbl intake and I believe I may have a leaking plenum. How much will I lose power wise doing this swap? I also do not have the install kit but I have a lathe so making the spacers would be no big deal, if I knew what size they need to be.
Thanks in advance!
I have a 1994 Dakota 5.2 it has a 52mm tb and a set of 1.7 hs rockers and an obd1 MP computer.
I managed to pick up a Mopar m1 2bbl intake and I believe I may have a leaking plenum. How much will I lose power wise doing this swap? I also do not have the install kit but I have a lathe so making the spacers would be no big deal, if I knew what size they need to be.
Thanks in advance!
Champion
Joined: Jan 2013
Posts: 4,737
Likes: 374
From: Northwest Louisiana
I'd check the info from Marty at http://utawesomeperformance.com/index.html or on his facebook page and see.
He's actually commented on what he's wringing out of the kegger as compared to a M1.
(No, I don't remember; I DO remember it seems like the kegger, with some minor mods, does a better job for your average driver.)
RwP
He's actually commented on what he's wringing out of the kegger as compared to a M1.
(No, I don't remember; I DO remember it seems like the kegger, with some minor mods, does a better job for your average driver.)
RwP