1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

96 4 cylinder conversion question.

Old Apr 10, 2006 | 08:57 PM
  #1  
blaine2005's Avatar
blaine2005
Thread Starter
Joined: Apr 2006
Posts: 2
Likes: 0
Default 96 4 cylinder conversion question.

This might sound stupid or something, but i would like to swap out my 4 cylinder 125 hp engine for the Dodge srt-4 230 hp 4 cylinder, that way i wouldn't have to get a new rear end and suspension for my truck. Would this be possible, seein as the dodge srt-4 is front wheel drive. Or what about beefing up the stock 4 cylinder on my dakota, could a turbo and stuff be installed to get the truck up to around 230 - 250 horses.
 
Reply
Old Apr 22, 2006 | 09:11 PM
  #2  
codydakota's Avatar
codydakota
Captain
Joined: Mar 2006
Posts: 553
Likes: 0
From:
Default RE: 96 4 cylinder conversion question.

2.5L 4 cyls were available back in the day with a turbo, so i would imagine you could swap the necessary hardware then go with a beefier turbo, know many people who upgraded the turbos on their 2.5L minivans. swapping the srt-4 motor would be expensive in itself let alone finding a way for a rwd tranny to bolt up would almost be a nightmare.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 09:59 PM.