anyone here with a 1st gen dakota lowrider?
I am thinkin about building a low rider dakota but I just wanna see some I looked around but couldnt find much of anything at all..

 

i don't think you will either as i have looked around also and found nothing. Keep trying though and let me know if you come up with anything. I know you can get a few things here http://www.andysautosport.com/truck/

 

I lowerd my 88 dakota. I used 3" lowering blocks for the back, and just heated up the front coils for about 1". it looks pretty good. I only did that cause it was only a beater. if it was a good truck I prolly would have done it right.

[IMG]local://upfiles/20888/C7E16DAAE5B34CBAB0E027F0821D20F8.jpg[/IMG]
________
WEBSITE HOST

 

I lowered my 93. I cut the front springs 2" and found rear spring hangers at aim industries. They are adjustable hangers and I really like them. This spring I will buy 2" drop spindles from the same company and replace the springs to get the ride qualtiy back.

[IMG]local://upfiles/49585/78236A12392745FB9A48A1D3DDB84C5A.jpg[/IMG]