1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

Fuel pump

Thread Tools
 
Search this Thread
 
  #1  
Old 11-10-2008 | 11:50 AM
DukeSupes's Avatar
DukeSupes
Thread Starter
|
Captain
Joined: Oct 2006
Posts: 565
Likes: 0
From: De Soto KS
Default Fuel pump

So this weekend was interesting. While visiting my Girlfriend about 40 minutes away from where I live, I get in the truck to head home and the truck runs for about 2 blocks then starts backfiring, and losing power. It comes out of it then just dies. So I pull over and take the air cleaner off. It starts and run for a few seconds then dies. Then wont start again. Feels like a fuel issue so I tap the fuel filter with a hammer and it starts right up and I drive it back to the apartment. I borrow her car to go buy a new filter, put it on and same issue. I am truly one of the luckiest guys in the world as my GF buys a new pump for me. Next day my dad comes down with a car dolly and pulls me into his shop. Lift up the bed and I take a look at the new pump from oreillys. Its a CARTER!! Just like the old one. We swap out the old for the new and even manage to get a new starter put on this weekend as well. I was completely thrilled when we were able to switch out both parts in less than a day. It was my dads idea to unbolt and lift the bed up rather than dropping the tank. I am so thankful for the people in my life and their never ending ability to shower me with inspiration and support.
 

Last edited by DukeSupes; 01-26-2009 at 02:54 PM.
  #2  
Old 11-10-2008 | 11:56 AM
DukeSupes's Avatar
DukeSupes
Thread Starter
|
Captain
Joined: Oct 2006
Posts: 565
Likes: 0
From: De Soto KS
Default

BTW, if anyone else runs into the problem that we did where the plastic retaining clips holding the fuel lines onto the pump break, the replacement part number in the help section is 800-015 NOT 800-23. Runs about $3.99 available at autozone.
 
  #3  
Old 11-10-2008 | 12:21 PM
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,926
Likes: 16
From: NM
Default

Alright! Sounds like it went smooth! Its always great to have such helpfull people in your life. LOL I had to lift the bed too to get to my pump before. It died on me with a full tank.
 
  #4  
Old 11-10-2008 | 12:36 PM
DukeSupes's Avatar
DukeSupes
Thread Starter
|
Captain
Joined: Oct 2006
Posts: 565
Likes: 0
From: De Soto KS
Default

A few rusty bolts/studs aside it went REALLY smooth. I have my dad to thank for that as he was the one that thought of lifting the box up. I had about 3/4 of a tank in mine.
 
  #5  
Old 11-10-2008 | 12:47 PM
fox's Avatar
fox
Veteran
Joined: May 2007
Posts: 461
Likes: 1
From: CA
Default

I was lucky when I did this on my truck unbolted the bed then we have twin post lift our shop
 
  #6  
Old 11-10-2008 | 05:36 PM
Bad96_3.9's Avatar
Bad96_3.9
All Star
Joined: May 2006
Posts: 867
Likes: 2
From: Crawfordville, FL
Default

i have always thought it is easier to remove the bed than the tank. and way to rub it in fox! lol
 
  #7  
Old 11-10-2008 | 07:39 PM
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,926
Likes: 16
From: NM
Default

Ya thanks Fox just rub it in! Just kidding! I Just got a friend to help me lift it. Its not to bad. We just sat it donw on some wood horses.
 
  #8  
Old 11-10-2008 | 09:49 PM
1shotjake's Avatar
1shotjake
Professional
Joined: May 2008
Posts: 175
Likes: 0
From: Milwaukee, Wi!
Default

helped a friend drop a half full tank w/ a few blocks of wood and an autojack... what a PIA

i think the worst part was the tank straps, one end locks into the frame, and the other bolts up. we had to bend it all to hell and deal with the tank... oy one of the worst things ive had the pleasure of helping with lol

when mine goes ima pull the bed as well...
 
  #9  
Old 11-11-2008 | 08:31 PM
kahanabob's Avatar
kahanabob
Captain
Joined: Sep 2006
Posts: 582
Likes: 0
Default

I assume you unscrew the 3 screws on the gas filler tube to free it up. What about the wireing to the tail lights?
 
  #10  
Old 11-11-2008 | 11:32 PM
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,926
Likes: 16
From: NM
Default

You can pull off the tail lights with in 2mins. And unplug the lights or just disconect the connector inbeween the lights.
 



All times are GMT -4. The time now is 06:45 AM.