1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

New Over head console install with pics.

Thread Tools
 
Search this Thread
 
  #1  
Old 10-12-2012, 12:47 PM
Crazy4x4RT's Avatar
Crazy4x4RT
Crazy4x4RT is offline
Hall Of Fame
Thread Starter
Join Date: Aug 2007
Location: NM
Posts: 10,926
Received 16 Likes on 15 Posts
Default New Over head console install with pics.

I was at my local U-PUll it looking for a stock automatic transmission shifter rod for a body lift delete. I found an overhead console from a 95 Dodge Dakota with compass and temperature. I pulled the entire console and support bracket and the sensor along with an automatic darking rear view mirror (which I doubt I'll use, since I have a lighted rear view mirror from my TA) and all the wiring for it all, all for $25.

I already had installed an over head console with a pocket and lights. But when offroading everything in the pocket jumps out. Since it was from a Dakota the mounting was easy and the console fits the roofs contour. Wiring was easy since I only needed to wire up 4 wires plus the ground which was easy (Ground, all time +, + with key on, and the 2 wires to and from the ambient temp sensor). I decided to cut out the back end of the console. I don't care for the garage door opener pocket and the sunglasses pocket which doesn't even fit a good pair.

Here are a few pics.

Old console that I fabbed up from a 90's Chrysler New Yorker.


Bracket mounted up.


New console installed and working properly.
 

Last edited by Crazy4x4RT; 10-12-2012 at 12:51 PM.
  #2  
Old 10-12-2012, 12:55 PM
keilkravec's Avatar
keilkravec
keilkravec is offline
Veteran
Join Date: Dec 2011
Location: Knoxville, TN
Posts: 433
Likes: 0
Received 0 Likes on 0 Posts
Default

ooooooo I might have to look for one at my pull yard when I go. Do all 95's have those?
 
  #3  
Old 10-12-2012, 01:24 PM
Crazy4x4RT's Avatar
Crazy4x4RT
Crazy4x4RT is offline
Hall Of Fame
Thread Starter
Join Date: Aug 2007
Location: NM
Posts: 10,926
Received 16 Likes on 15 Posts
Default

No not all 95's. It was an option on 95-96 only I think. Maybe 94 not to sure though.
 
  #4  
Old 10-12-2012, 01:46 PM
keilkravec's Avatar
keilkravec
keilkravec is offline
Veteran
Join Date: Dec 2011
Location: Knoxville, TN
Posts: 433
Likes: 0
Received 0 Likes on 0 Posts
Default

ah alright, hopefully one of the 7-8 95 daks at the yard has one cause thats pretty snazzy

also where do you run the wires for it? down the pillars on one side perhaps? pics of that would be pretty awesome, then this could be added to faq2 under DIY!
 

Last edited by keilkravec; 10-12-2012 at 02:28 PM.
  #5  
Old 10-12-2012, 07:39 PM
melodytoinvent's Avatar
melodytoinvent
melodytoinvent is offline
Captain
Join Date: Nov 2009
Location: Michigan
Posts: 529
Likes: 0
Received 0 Likes on 0 Posts
Default

Sooo jealous!!
 
  #6  
Old 10-12-2012, 09:13 PM
Richard Graves's Avatar
Richard Graves
Richard Graves is offline
Amateur
Join Date: Aug 2012
Location: Southwest Missouri
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Default

Yeah, that's a must have for me too! I'll keep my eyes open!
 
  #7  
Old 10-12-2012, 09:34 PM
inuchan187's Avatar
inuchan187
inuchan187 is offline
Professional
Join Date: Jan 2012
Posts: 151
Likes: 0
Received 0 Likes on 0 Posts
Default

I have one from my 94, but it needs to be reuppholstered. They also show gas mileage, which i didn't even know they did on any non-luxury cars back in those days.
 
  #8  
Old 10-12-2012, 09:53 PM
Crazy4x4RT's Avatar
Crazy4x4RT
Crazy4x4RT is offline
Hall Of Fame
Thread Starter
Join Date: Aug 2007
Location: NM
Posts: 10,926
Received 16 Likes on 15 Posts
Default

Originally Posted by keilkravec
ah alright, hopefully one of the 7-8 95 daks at the yard has one cause thats pretty snazzy

also where do you run the wires for it? down the pillars on one side perhaps? pics of that would be pretty awesome, then this could be added to faq2 under DIY!
As for wires I just ran them back to connect to the stock dome light output then to just down the side and down following the stock wiring.

I already got the headliner installed and all the panels back on. But since it was a factory Dakota option it is an easy install if you get everything you need.

I can try to take a larger shot tomorrow.

Originally Posted by inuchan187
I have one from my 94, but it needs to be reuppholstered. They also show gas mileage, which i didn't even know they did on any non-luxury cars back in those days.
I reupholstered this one.

You sure yours does gas mileage? Mine doesn't and the 95 and 96 Dakota factory service manuals don't state it, or even have wires to connect to the PCM or the speedo, as well as the 96 Owners manual I got don't state anything about MPG.
 
  #9  
Old 10-12-2012, 10:25 PM
shadowthedakota's Avatar
shadowthedakota
shadowthedakota is offline
Record Breaker
Join Date: Jun 2009
Location: Appleton, WI
Posts: 1,929
Likes: 0
Received 1 Like on 1 Post
Default

the '97+ ones show fuel economy and all that info


Posted from Dodgeforum.com App for Android
 
  #10  
Old 10-13-2012, 01:24 AM
keilkravec's Avatar
keilkravec
keilkravec is offline
Veteran
Join Date: Dec 2011
Location: Knoxville, TN
Posts: 433
Likes: 0
Received 0 Likes on 0 Posts
Default

Any idea if the 97+ ones can be wired in to work correctly on OBDI?
 


Quick Reply: New Over head console install with pics.



All times are GMT -4. The time now is 04:32 AM.