Champion plugs, (non platinum) regular old plugs, truck plugs or Iridium (Iridium cost a lot, other 2 options work fine)

8mm for wires
Any name brand

Cap rotor
Make sure it has brass or copper terminals on it.


You follow that and u would have done a good tuneup.

 

I prefer MSD Red 8.5mm wires or OEM wires only for these rigs if you don't have a 4.7L.

Cap and rotor spend the $2 bucks more for brass contacts and Champion Regular Copper Plugs (OEM) or Champion Truck Plugs for a hotter burn or Iridium Champion Plugs for a softer idle.

For the 4.7L I recommend Champion regular Copper Plugs or Champion Truck Plugs for a hotter burn. Not sure on the Iridium Champion Plugs in the 4.7L. Also 4.7L does not hae wires it only has coil overs.

Also install a 180 degree T-stat.

 

I'm sorry, please help... Was it the sensor or the abs pump that needed to be replaced? I'm going to the mountains in 3 weeks and want that pump working, you know, snow and ice!!

 

Um,


Clean up on isle 3 Sharps or Dan!.....LMAO


The user replaced the ABS sensor on the rear diff, then replaced the ABS Module. Your might be a different story.

 

please start your OWN THREAD for your issue and provide us with details as to what is happening in your case with as much detail as you can

make sure to start a NEW THREAD