PLEASE HELP Durango 5.2L NO TAKEOFF POWER
#1
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
1999 dodge durango 5.2 205,000 one day it was fine then all of the sudden if u press gas from dead stop it has no power till about 2500 rpm when the cam kicks in. it goes from 0-20 in probably about 3 seconds!! Evewrything else is fine idles perfect NO CODES just did plenum and intake about a month ago. took the CAT off left in o2 sensors. my computer does not have the death flash sticker so thats probably not it. no misfires whatsoever. im totally lost on this one!!! injectors partially clogged???????
If anyone can help you will be my hero THANKS!
If anyone can help you will be my hero THANKS!
#3
#4
#6
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
UPDATED INFO-
problem/issue-is that it has VERY POOR torque from a dead stop, i was in slimy mud and tried powerbraking it and tires would even spin!!! If you hold the brake and put it to the floor the rpm's will go no higher than 1600. My uncle hooked it up to the snap on exodus this morning it has no codes everything seems to be checking fine so my uncle said its probably the torque converter??? does this sound correct? remember no codes came up engine runs PERFECT
problem/issue-is that it has VERY POOR torque from a dead stop, i was in slimy mud and tried powerbraking it and tires would even spin!!! If you hold the brake and put it to the floor the rpm's will go no higher than 1600. My uncle hooked it up to the snap on exodus this morning it has no codes everything seems to be checking fine so my uncle said its probably the torque converter??? does this sound correct? remember no codes came up engine runs PERFECT
#7
Trending Topics
#8