1st Gen Durango 1998 - 2003 Durango's

my 2002 durango keeps stalling after parts are replaced! HELP

Old Apr 20, 2010 | 07:01 PM
  #1  
mike71098520's Avatar
mike71098520
Thread Starter
|
Registered User
Joined: Apr 2010
Posts: 28
Likes: 0
From: CA
Default my 2002 durango keeps stalling after parts are replaced! HELP

ok, so my 02' durango was running perfect!!! until a few months ago it started stalling when i come to a stop, when giving it gas or driving it runs awesome!!! but i stop it sputters down and dies. I replaced the TPS and it didnt do anything, i took it to a shop and and they looked at it, (keep in mind there is no CEL on) they said after hooking it up, they found that the IACV was slow to respond. so i replaced that and it seemed to run good for that day. the following day is would sputter but not die, than so on and so on. finally, to today it is dying again. i dont know dodge's very well at all... im more of an import guy, and this is really getting to me. i have a long trip coming up and need to get it fixed. anyone have any idea's? im lost!!!!


past issues include o2 sensors going bad, those are all replaced. fresh tune up about 9 months ago. tps and iacv were both replaced. still having trouble...
 
Reply
Old Apr 20, 2010 | 07:50 PM
  #2  
1969CoronetR/T's Avatar
1969CoronetR/T
vaffanculo
Joined: Oct 2008
Posts: 7,954
Likes: 2
From: Pittsburgh, PA
Default

Repost in the first generation Durango section as this is the general forum and someone over there should be able to help,
FF
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 01:47 PM.