1st Gen Durango 1998 - 2003 Durango's

Temperature related

Thread Tools
 
Search this Thread
 
Old Jun 14, 2010 | 07:06 PM
  #1  
BeachBoy's Avatar
BeachBoy
Thread Starter
|
Amateur
Joined: May 2009
Posts: 26
Likes: 0
From: Savannah, GA
Default Temperature related

So we finally hit 100 degrees here in Coastal Georgia today. Possibly coincidentally, I started getting a nasty vibration in the steering, and the engine light came on. Vibration was at all speeds. Egine code is P0455, Evap Leak Monitor Large Leak Detected. Just drove the car around after letting it cool awhile, and the vibration seems to be better. Thoughts on what either issue might be as it relates to crazy heat and humidity?
 

Last edited by BeachBoy; Jun 14, 2010 at 07:13 PM.
Reply
Old Jun 14, 2010 | 10:49 PM
  #2  
shrpshtr325's Avatar
shrpshtr325
THE ULTI-MOD
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Jan 2007
Posts: 19,797
Likes: 36
From: Union NJ
Default

the p0455 is either a cracked vacum hose on the vap system (most likely by the charcoal canister under the drivers seat) or a bad gas cap, both easy to fix the vibration is odd, have you been off-road lately? (mud caked in one of the rims??) or hit any nasty potholes (slip a belt in a tire) or have anything else leading up to the vibration??
 
Reply
Old Jun 15, 2010 | 08:16 PM
  #3  
BeachBoy's Avatar
BeachBoy
Thread Starter
|
Amateur
Joined: May 2009
Posts: 26
Likes: 0
From: Savannah, GA
Default

No, I haven't done any crazy driving lately, but that's relative I guess. Drove it today, and no vibration. Where it happened yesterday was the same roads I drive everyday, too. Started looking for the vacuum leak, and got as far as deciding that I'm going to rip off that stupid skid plate this weekend.
 
Reply
Old Jun 15, 2010 | 08:56 PM
  #4  
MAGIC84's Avatar
MAGIC84
All Star
Joined: Dec 2006
Posts: 950
Likes: 0
From: MINNEAPOLIS, MN
Default

+2 on the evap hoses, if in doubt replace. The ones by the charcoal canister are pretty easy, and a good chance of dryrotting. Another place to check is behind the PCV valve, there is a rubber hose that leads to a plastic tubing that runs behind the engine.
 
Reply




All times are GMT -4. The time now is 08:27 PM.