Durango trailer lights
 

Hello new to the site and have a question. I'm wiring my durango with a 4 prong flat plug. How do I wire the turn signal and brake into one wire? The wires I splicing into has 5 wires. left turn, right turn, tail lights, brake, reverse, ground. Or do I need to get a 5 prong plug?

you only need right turn, left turn, tails, and brakes. the ground runs into the frame.

this should be in the first gen durango section, ill move it there for you

You can either look for the 4 wire lead that is tucked up between the drivers side frame and spare taire area or get a box that does it for you. Personally, I would look for the 4 wire lead that are already there and be done with it.

they also dont make a 5 prong plug (that i know of) its 4 or 7

also, most connector come with some sort of wiring diagram, should tell you what you are looking for (if its generic i understand the frustration)

http://www.mapmyride.com/membership_comparison

this is a pdf with the trailer wiring for an 02 durango, it should be similar

There is a flat 4, 5 round, 6 round, or a 7 way round plug setup. All are different depending on the trailer and the options that are needed for you to operate it.


The member is talking about a flat 4 wire hook up.