I have a 2002 durango with the factory tow package and the problem is this. All the lights work great on the durango but I have no driver side brake on the trailer. It has turn but no brake (same bulb). Trailer wiring is fine. I chased the green/red wire from the plug all the way to the firewall and it's not getting power when the brakes are on under the dash somewhere. Where does the turn wire meet with the brake wire to become a break and turn wire at? Maybe my problem is there. Any ideas or help would be great

 

It sould be in the CTM.

 

where would that be located at?

 

drivers side kick panel

http://www.mediafire.com/?kwmwzuvymmf

 

Thank you. It sounds like replacing that may be out of my league. I know I could just run off of the car lights with a T-connector but i'll know in the back off my head there is still a problem somewhere. I don't think trailer lights need to be this complicated lol. Again thank you for the help and anything else you can think of.

 

if everything else is working correctly that pretty much what i would do (to be honest)