1st Gen Durango 1998 - 2003 Durango's

engine heat high?!

Thread Tools
 
Search this Thread
 
Old Apr 8, 2011 | 09:45 AM
  #11  
ajoshi91's Avatar
ajoshi91
Thread Starter
|
Captain
Joined: Jun 2010
Posts: 597
Likes: 0
From: Minneapolis
Default

hey shrp, are you talking about that little metal cap further down on the larger radiator hose there in the picture? and than the small line coming off of it? i can check those lines and the cap.
 
Reply
Old Apr 8, 2011 | 09:49 AM
  #12  
shrpshtr325's Avatar
shrpshtr325
THE ULTI-MOD
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Jan 2007
Posts: 19,797
Likes: 36
From: Union NJ
Default

yup those are the ones im talking about, iw ould just replace em if i was you
 
Reply
Old Apr 8, 2011 | 04:34 PM
  #13  
samnbensdad's Avatar
samnbensdad
Captain
Joined: Jun 2010
Posts: 682
Likes: 0
From: Indianapolis, IN
Default

Small amount of coolant on the floor ... Rapid drop in temperature ... Have you checked your water pump? Could be leaking via weep holes indicating spent bearing. Bad bearing= poor circulation = inconsistent temp regulation.
Do you have any back-and -forth movement on the water pump pulley?
 
Reply
Old Apr 8, 2011 | 09:33 PM
  #14  
ajoshi91's Avatar
ajoshi91
Thread Starter
|
Captain
Joined: Jun 2010
Posts: 597
Likes: 0
From: Minneapolis
Default

i haven't checked the water pump. But i got the t-stat changed out. and i topped off the line with new antifreeze. had her running til she got up to temp than drove her around and she's acting fine. hopefully this problem is solved with just the changing of the t-stat.

just have to wait and see. if not I'll check the water pump.
 
Reply
Old Apr 8, 2011 | 09:57 PM
  #15  
samnbensdad's Avatar
samnbensdad
Captain
Joined: Jun 2010
Posts: 682
Likes: 0
From: Indianapolis, IN
Default

Thermostat makes since. Hope that takes are of it. You didn't get the Fail Safe did you?
 
Reply
Old Apr 8, 2011 | 10:43 PM
  #16  
ajoshi91's Avatar
ajoshi91
Thread Starter
|
Captain
Joined: Jun 2010
Posts: 597
Likes: 0
From: Minneapolis
Default

the fail safe? what is that?
 
Reply
Old Apr 8, 2011 | 11:04 PM
  #17  
samnbensdad's Avatar
samnbensdad
Captain
Joined: Jun 2010
Posts: 682
Likes: 0
From: Indianapolis, IN
Default

It's a thermostat that sticks in the open position if it fails. The concept makes since, but they have a high failure rate. I personally have had bad luck with them.
 
Reply
Old Apr 8, 2011 | 11:30 PM
  #18  
WhiteWidow00's Avatar
WhiteWidow00
Record Breaker
Joined: Jun 2010
Posts: 1,743
Likes: 0
From: St. Petersburg, Florida
Default

Yes but the positive side on those is that you'll never have the issue you had before. Good luck and hopefully it was a fairly easy fix.
 
Reply
Old Apr 8, 2011 | 11:48 PM
  #19  
ajoshi91's Avatar
ajoshi91
Thread Starter
|
Captain
Joined: Jun 2010
Posts: 597
Likes: 0
From: Minneapolis
Default

I don't think it is a fail safe t stat. i think its just a regular one. bought it from autozone (duralast). well anyways yeah the install wasn't to bad. i had my dad helping me out to. plus my airaid Jr intake came today so installed that as well.

overall good day i suppose. hopefully this is all good and taken care of.
 
Reply
Old Apr 9, 2011 | 01:12 AM
  #20  
hydrashocker's Avatar
hydrashocker
Hall Of Fame
20 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Jun 2005
Posts: 14,228
Likes: 19
From: Riverton, UT
Default

The overflow line is connected to the coolant reservoir, thus to recycle coolant instead of dripping it to the ground.
 
Reply



All times are GMT -4. The time now is 09:41 PM.