4x4 not working
Thread Starter
|
Registered User
Joined: Nov 2011
Posts: 2
Likes: 0
From: fulton ny
4x4 not working
2002 dodge durango 4x4 not working....i dont have a service light like everyone else on here but the lights on my switch dont light or anything no noise or anything need help
THE ULTI-MOD
Joined: Jan 2007
Posts: 19,797
Likes: 36
From: Union NJ
https://dodgeforum.com/forum/dodge-d...s-section.html
ill move it this time, but im the only one who reads this section
ill move it this time, but im the only one who reads this section
Record Breaker
Joined: Nov 2006
Posts: 1,222
Likes: 1
From: Ohio
Jgap:
First off, check your fuses that go to the TCCM or transfer case control module. If they are all good, then most likely your TCCM is bad. They can be had used for $50-$150, but new they run closer to $400.
Read this post for lots of info regarding your issue.
https://dodgeforum.com/forum/1st-gen...tion-tccm.html
The switch is rarely the issue. What markings does your switch have on it?
Don
First off, check your fuses that go to the TCCM or transfer case control module. If they are all good, then most likely your TCCM is bad. They can be had used for $50-$150, but new they run closer to $400.
Read this post for lots of info regarding your issue.
https://dodgeforum.com/forum/1st-gen...tion-tccm.html
The switch is rarely the issue. What markings does your switch have on it?
Don
Last edited by n8ech; Nov 6, 2011 at 08:21 PM.