So you saying that the motor crank an crank but didn't start ??? An when you are saying that it turn over do you mean that it started then it quit ??? Next time it cranks an won't start the see if you are getting spark to the coil,, From what I been reading in this thread it seems like the PCM is going out on you,, But thats my thinking,,

 

Well started when I got home tonight and drove 8 miles parked and then that same 8 miles home on side of road 3 or 4 times quit counting. Pulled white plug to pcm and back again and tricked started again. I have no clue anymore if pcm solves problem I would be so damn happy.

 

Also russ50 how is yours running since new pcm still running good

 

If you have to keep unplugging the pcm to me it sounds like that would be your problem.

 

Ok so today it had been running then tonight I get 0622,0722,1495,0505 and if it starts it just runs like crap so am I down to a pcm

 

Before you replace the pcm at least check for loose or spread terminals in the pcm connections. When you unplug the connector and reconnect you may be making good contact at least for a short while. I would check all connections to sensors that are throwing codes as well.