Y pipe issue.
Thread Starter
|
Registered User
Joined: Dec 2014
Posts: 4
Likes: 0
Y pipe issue.
Hello,
.Anyone know the best way to get a rusted Y pipe out at the catalytic converter. I been soaking it with pb blaster and have cutting off all but 6 inch of the Y pipe to the converter.I just want to put another stock Y pipe on. But can't seem to get the last 6 inch from the conveter.
1999 Dodge Durango
318 4x4
.Anyone know the best way to get a rusted Y pipe out at the catalytic converter. I been soaking it with pb blaster and have cutting off all but 6 inch of the Y pipe to the converter.I just want to put another stock Y pipe on. But can't seem to get the last 6 inch from the conveter.
1999 Dodge Durango
318 4x4
Last edited by stingray32; Dec 9, 2014 at 07:07 PM.
All Star
Joined: Jan 2013
Posts: 993
Likes: 11
From: Albuquerque, NM
Assuming the Y goes into the converter, not on the outside (if I recall), I'd cut the thing 1/4" shy of flush at the converter and using vice-grips on that 1/4", twist the crap out of the stub, folding it into the center of the circle. It shouldn't take much.
