98 Durango Trailer Help
Thanks for the great post. I am camping with my durango this weekend. hooking up my trailer brakes at the last minute. My truck has 7 pin connector, so I thought I was cool, but I do not have factory wiring package. Went nuts looking for 4 wire connector under dash. I will be ordering factory setup. I have a question. Where does it plug in under the hood? did you figure out which wire on the pedal. I have mitchel so I can figure that out, but dealer is closed and I am going to hook up temporary wiring kit. just got to this forum. I am curious, does the factory tow package come with heavier trans cooler, and radiator?
hey guys --- have a slight variation to this problem, my wifes durange (2001) appears to have come with the factory trailer wiring, but some *&^% cut it off 10" up from the hitch --- any ideas?
chump --- could you email those wiring diagrams to me also THANKS
Kevin
chump --- could you email those wiring diagrams to me also THANKS
Kevin
ORIGINAL: packratt53
hey guys --- have a slight variation to this problem, my wifes durange (2001) appears to have come with the factory trailer wiring, but some *&^% cut it off 10" up from the hitch --- any ideas?
chump --- could you email those wiring diagrams to me also THANKS
Kevin
hey guys --- have a slight variation to this problem, my wifes durange (2001) appears to have come with the factory trailer wiring, but some *&^% cut it off 10" up from the hitch --- any ideas?
chump --- could you email those wiring diagrams to me also THANKS
Kevin
ORIGINAL: 1 bad durango
the tow package from the dealer consist of an external trans cooler a class 4 hitch all connecters and a 3.92 rear gear with a limited slip
the tow package from the dealer consist of an external trans cooler a class 4 hitch all connecters and a 3.92 rear gear with a limited slip
hahaha i read all the post to the end thinkin i would find out what wire i needed to tap into, i am doin the exact same thing as the originator have the 4 way plugged in, used a 7 way socket for future expansion now adding the brake controller for my car trailer.
1) any one got this figured out yet and i already know there is no connector (not prewired) its a 2003 durango.
2) is there a way to wire up without splicing for the power/ground wires at least, i guess i'll have to splice for the brake (when i find out which wire lol) i'd like to not have to run str8 to the battery if possible as i have amp wires there already dont want it lookin cluttered.
Thank you all in advance
Thom
1) any one got this figured out yet and i already know there is no connector (not prewired) its a 2003 durango.
2) is there a way to wire up without splicing for the power/ground wires at least, i guess i'll have to splice for the brake (when i find out which wire lol) i'd like to not have to run str8 to the battery if possible as i have amp wires there already dont want it lookin cluttered.
Thank you all in advance
Thom
ORIGINAL: 1 bad durango
the tow package from the dealer consist of an external trans cooler a class 4 hitch all connecters and a 3.92 rear gear with a limited slip
the tow package from the dealer consist of an external trans cooler a class 4 hitch all connecters and a 3.92 rear gear with a limited slip




