1G Intrepid - No reference voltage at crank and cam sensors??!
Thread Starter
|
Registered User
Joined: Oct 2009
Posts: 2
Likes: 0
1G Intrepid - No reference voltage at crank and cam sensors??!
So the car wont start. There is no 8V at the reference voltage pin on the 2 sensors. I checked at pin 7 on the PCM - same thing.
hmm
Also no 5V at the pcm. The PCM is getting 12V from the batt and the grounds all seem fine.
I bought a junkyard PCM, and it was exactly the same.
Any ideas?! (Dodge service guy says u cant use junkyard pcms as they must be programmed to the vehicles VIN) dunno.
hmm
Also no 5V at the pcm. The PCM is getting 12V from the batt and the grounds all seem fine.
I bought a junkyard PCM, and it was exactly the same.
Any ideas?! (Dodge service guy says u cant use junkyard pcms as they must be programmed to the vehicles VIN) dunno.