95 Intrepid Overhead Cons
Thread Starter
Joined: Oct 2003
Posts: 13
Likes: 0
From: United States
95 Intrepid Overhead Cons
Amanda,</P>
You are great. Thanks Alot. Went to the dealer today and ordered the mounting braket for it. It was only 23.00 but the wire harnest was like 80.00 oh well I can hard wire in the display. Its only 4 wires. Hope I can help others with some problems too.</P>
Bryan</P>
Thread Starter
Joined: Oct 2003
Posts: 13
Likes: 0
From: United States
95 Intrepid Overhead Cons
Well I found the wires that I need to connect to the CCD bus under the dash but no go the console shows nothing but the compass. On looking at the diagram that Amanda got me it looks like the Overhead Console Moduale was not installed because my car did not have this option. Does anybody know where this module would be located and if not do you think that I could maybe just buy one and connect it to the concole since it is a basic positive and negative buss.
All Star
Joined: Dec 2003
Posts: 993
Likes: 0
From:
95 Intrepid Overhead Cons
hmm...I am not sure but I will see what I can find...though Amanda will probably beat me to it LOL
What all is this supposed to tell you?? direction and temp only or MPG and stuff like that??
What all is this supposed to tell you?? direction and temp only or MPG and stuff like that??
Thread Starter
Joined: Oct 2003
Posts: 13
Likes: 0
From: United States
95 Intrepid Overhead Cons
The direction is independent from the rest of the console. As sone as I hooked up the power the compass worked. The info that I am not getting is the temp, MPG and things like that. I really don't care about the other stuff I would really just like the temp to work. Took the temp sensor from my console install in the truck but it didn't do any good. I know it's alotof questions and time for a silly thing like this but I just like to see if I can get my crazy ideas to work.
Lady Administrator
Joined: Sep 2003
Posts: 13,114
Likes: 3
From: Shelby Twp, Michigan
95 Intrepid Overhead Cons
Hmmmm... I want to check with the electrical mechanic before fully responding... I think you may just need the module... but I want to make sure... 
~Amanda
~Amanda
Joined: Nov 2003
Posts: 2
Likes: 0
From: United States
95 Intrepid Overhead Cons
Hello.</P>
New to the Forum here. I came from over at DodgeIntrepid.net.</P>
I was reading the post, and I was interested in this because I am about to do the same with my '95. Do you have the 3-connector BCM? I think it is required for this to work.</P>
Have you completed the work yet? Was the wiring pre-existing?</P>
Lady Administrator
Joined: Sep 2003
Posts: 13,114
Likes: 3
From: Shelby Twp, Michigan
95 Intrepid Overhead Cons
WELCOME!! DF is growing all the time... (I know... I'm on the inside!! LOL!) and some GREAT features are coming... please keep coming back!
The Overhead Console Ambient Temperature Sensor is located in the front bumper... you'll need to buy one from the dealer or junkyard and install it yourself since your car wasn't equipped from the factory... that's what I've found out so far... LOL!
~Amanda
The Overhead Console Ambient Temperature Sensor is located in the front bumper... you'll need to buy one from the dealer or junkyard and install it yourself since your car wasn't equipped from the factory... that's what I've found out so far... LOL!
~Amanda
Thread Starter
Joined: Oct 2003
Posts: 13
Likes: 0
From: United States
95 Intrepid Overhead Cons
I havent done the install yet. Need to get the bracket to mount it. Have gone to the dealer twice and they otrdered the wrong part both times. Is the OTIS all that I need to get. I tryed to hook up to the bus that is under the dash but no go. Well next time I go to the dealer I will look and see how much the OTIS is.