alright!

as you guys might remember i broke the hose that connects to the stock intake tube (and the one you have to put the tiny filter on) when i was putting in my cold air intake

SO

the part is sitting at my house and i'm either going to put it on tonight or tomorrow
are there any parts that i have to take off to get to it and securly put it on?

i know where it is i just don't know if i have to take stuff off

thanks!

 

2 small hose clamps is all you need.

 

hose clamps?


the hose didn't even have hose clamps on it before i broke it

 

Are you talking about the actual like hose/pipe thing that comes off the valve cover that is connected to the valve cover or the hose that goes from the valve cover to the air filter? If its the hose that went from the vc to the cai then you will need two small hose clamps to secure the small new fliter onto that tube.

 

it's not connected to the valve cover at all



it's connected to the block



its the hose that comes from the block and connects to the stock intake hose on the little nub that comes off
it's shaped like a sideways L


there were no little clamps on it in the first place

and i already know about hte clamp for the tiny filter but that's not what's concerning me right now


thanks though

 

OH, you have a 95!!!!!! I forget sometimes.

 

ahahahah yea


i got the ghetto/cool/little faster year

 

Oh ok!!! yeeh I was like what?? lol

 

Did you get the Borla muffler on there yet?

I am looking for an 01 Magnum cam to put in my ported head to swap in there in the summer sometime.

 

i'm putting it on this weekend hopefully


i'm going to get the car smogged first (which is why i'm asking about the hose)


i work at the least 9 hours each on friday and saturday
and sunday i work 3 or 4 hours but i don't think the muffler shop is open sundays
i'm hopying they are