ok that doesnt look too hard to do. and thanks for getting me a list. i have $700 now for the turbo and i'll have another 3 in a month tops, so it will be pretty soon.

 

You know, I just realized I can get those fittings for less than half what you would normally pay for them...

 

hey SPUD about how much total does it cost roughly for the entire install. will a 1,000 bucks do it? if so im really interested in doing it within the next 2 months. also i do have a sohc engine will it make it any harder or will this matdog adapter das was talkin about make it the same? also anyone know a way i can contact this matdog person?

 

https://dodgeforum.com/m_348282/mpag.../tm.htm#372285click here scroll to the bunch of links in one reply and hopefully you can get in contact with him

 

i couldnt tell you about the adapter...ive never had a sohc to mess with so i dont know anything about it..
if you have $1,000 then you can probally get just about all the parts needed.....depends on how you find some of the parts...be it used or brand new...this is a preety complete list for the "must haves"
my parts were about this:
turbo with blow off valveand02 housing $200
agp wastegate $80 (a must if using your stock internals)
srt4 intercooler $60
srt4 hot/cold side pipes $40
srt4 catalytic convertor $30
srt4 oil return line $12
fuel pressure regulator $145
map clamp $100 (from hahn, best way to go)
srt4 boost gauge $12
rubber fuel line, 1/4" steel fuel line ~$80
fitting for fuel line, fuel pump, and regulator ~$60
fittings for fuel pump return line ~$45
2.5" intercooler pipe kit $100
fuel pressure gauge $45
oil pressure gauge $45
fittings for custom oil feed T ~$8
vaccum lines ~$ 15
i think thats about it....i dont know what it all comes out to...maybe sumone has a calculator

 

just over $1000

 

you can find most of the srt4 parts on srtforums.com for pretty cheap

 

ok cool. idk about that mattdog adapter though. kinda disappointed. not really sure what imma do. but shouldnt hahn make one since they produce the turbo kit?

 

hahns kit has a manifold for the sohc and the dohc you don't need the adapter with hahn just the srt-4 turbo

 

the srt4 turbo will only work with the srt4 manifold...thats just how it was designed...
i dont like to buy much of anything from hahn though.......way way way to over priced....
a dohc turbo exhaust manifold costs $600[&:]