FOR SALE
Captain
Joined: Aug 2007
Posts: 679
Likes: 0
From: san jose
RE: FOR SALE
ORIGINAL: spudsterier
srt4 stock intercooler.....$80....will include all intercooler pipes used for the srt4/1st gen setup for an additional $70
2 JE 8.8:1 turbo pistons, includes rings, wrist pins, and wire locks, used for 259 miles......$175
hahnraceraft stage 2 F.M intercooler pipe kit..(intercooler not included, but does include, BOV,andall couplers and clamps).....$150
hahn racecraft map clamp......$40
i am sure there is more and i will add them as i think of them
srt4 stock intercooler.....$80....will include all intercooler pipes used for the srt4/1st gen setup for an additional $70
2 JE 8.8:1 turbo pistons, includes rings, wrist pins, and wire locks, used for 259 miles......$175
hahnraceraft stage 2 F.M intercooler pipe kit..(intercooler not included, but does include, BOV,andall couplers and clamps).....$150
hahn racecraft map clamp......$40
i am sure there is more and i will add them as i think of them
also its only 2 pistons? not all 4? im in the process of ordering all the parts for a top and bottom end rebuild. but reading up on compression.....i basically got lower compression more boost? so those pistons make a drastica difference?
Thread Starter
|
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
RE: soon to be for sale
solid bobble strut is still for sale...head studs were used for 259 miles, but they are forged studs, not bolts so they are made to be re-used over and over again...
lower compression pistons allow your motor to handle more boost safely....
i odnt know if the pistons will work in a 2nd gen block since they are from a dohc...i only have 2 good pistons though...the other 2 are junk do to poor shop work
the srt intercooler should work with the srt intercooler, but you will probally have to do some cutting of the pipes...but i also have the intercooler pipes i used with the srt4 turbo/srt4 intercooler
lower compression pistons allow your motor to handle more boost safely....
i odnt know if the pistons will work in a 2nd gen block since they are from a dohc...i only have 2 good pistons though...the other 2 are junk do to poor shop work
the srt intercooler should work with the srt intercooler, but you will probally have to do some cutting of the pipes...but i also have the intercooler pipes i used with the srt4 turbo/srt4 intercooler