1st Gen Neon 1995 through 1999 Neons

ATX TB on MTX Question

Thread Tools
 
Search this Thread
 
Old Jun 1, 2008 | 02:40 PM
  #1  
duelsxt's Avatar
duelsxt
Thread Starter
|
Professional
Joined: Feb 2005
Posts: 122
Likes: 0
From:
Default ATX TB on MTX Question

Does this mod really make a difference. Can you feel it.
 
Reply
Old Jun 1, 2008 | 02:42 PM
  #2  
fsu182's Avatar
fsu182
Captain
Joined: Sep 2007
Posts: 564
Likes: 0
From: PA
Default RE: ATX TB on MTX Question

the atx spring is softer. so the pedal hits the floor a lot easier. feeling it is arguable but is it worth doing? definetly.
 
Reply
Old Jun 1, 2008 | 05:18 PM
  #3  
I_Ride_Neon's Avatar
I_Ride_Neon
Record Breaker
Joined: Nov 2007
Posts: 2,004
Likes: 0
From: Dubuque, Iowa
Default RE: ATX TB on MTX Question

I have seen dynos to prove it adds hp. But it wont be enough to notice. Maybe 1-3 hp if your lucky.
 
Reply
Old Jun 2, 2008 | 07:53 AM
  #4  
Ghost Neon 2's Avatar
Ghost Neon 2
Record Breaker
Joined: Dec 2006
Posts: 1,216
Likes: 0
From: Baltimore, Maryland
Default RE: ATX TB on MTX Question

Perhaps I can paint a picture for you. Picture the shaft of the myx tb as being an hour glass. Not quite that narrow, but narrows just before the throttle plate about 4mm. Doesn't seem like to big a deal, but this does have an effect on air flow.

Now picture the shaft of the atx tb as being a can of soup. Though not as wide, the shaft goes straight through.

That is the difference between the two throttle bodies. The difference is noticeable, and even more profound with more modifications. I'd recommend an intake, atb tb, and under drive pulley to start. This will certain spring some useable power into your ride.
 
Reply




All times are GMT -4. The time now is 10:06 AM.