i made a solid one cuz the motor kept moving so much it would crunch the oil filter on the subframe thing cuz i have the srt oil pump and srt long filter. i just used about a foot of 1 inch square tubeing and welded a bolt with the same thread pattern as the nut on the top of the stock bobble strut to a little peice of steel plate that i used for a cap at one end then i drilled a huge hole at the other end and pulled the sleeve out of the stock bobble strut and slid the sleeve in the big hole and welded there so it wont slide around too much. then used the stock rubber washers just how they were on the stock one and bolted it up. and dam the motor will absolutely not move with the race motor mount insert in the front and stock side mount and tranny mount. it does vibrate a bit tho but it puts the power to the road instantly. i was considering putting together a how-to cuz i have a bunch of pics of the whole assembly.

 

damn that sounds to easy lol great job i will have to save this

 

ive also heard of people wraping the oem one with a hose and some clamps.

 

sheesh talk about a tweeker project!! Thats awesome!

 

lol thanks man. it wasnt too hard either it really stiffens up the motor. which really helps since its a 2.4 swap and huge turbo

 

Where are pics and possible dimensions im going to make one for my 97 highlineand vould use some ideas lol

 

Needs more pictures.