can this be done? i really want to do this swap whats it take? is it possible?

 

It's best if you have donor car for parts, front and rear hubs, rotors/drums, shoes/pads, calipers. You would have to check but I think the steering knuckle is different as well as the bearing. Should be an easy swap if you can find cheap donor car.

 

just go jy, get front spindles/caliper/rotors, rear hubs and drums and that's it. you can use your old spindles and press in 5bolt hubs the 4 and 5 bolt hubs use the same bearing. but then you'd need to buy some rotors. it's easier to just swap spindle/knuckle assembly.

 

i have a donor car thats why im askin so i can jus use the spindals and all direct bolt on?

 

if you already have the parts, why not just give it a shot. since the bearing part numbers are the exact same for the front 4/5 logically it would be likely so is the knuckle assembly. shouldnt take more than 1/2 hr to swap this part. rears are even easier just swap hubs and drums. same brake shoes between the two.

 

i understand what your sayin ill be tryin it out one of these weekends ill be sure to let you all know how it goes maybe do a tutorial

 

Why would you want to swap? The 4x100 lug pattern offers way more rim styles than the 5x100!

 

yeah but not 4 wheel disk and i want srt 4 rims and also better braking do to larger pad

 

So you are gonna upgrade your brake kit also?

 

well im upgrading to the stock sport 5 lug brakes and rear disk and then from there to the srt4 brakes proly