dirt track help
#1
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
i need some help!!!i run a 98 neon sohc,header,55mm tb,mopar computer,msd coil,accel wires.i run on a 3/8 n 1/2 mile dirt track.im wanting to build a motor but not sure what be best for application.constantly gettn spanked by ford probes.gotta keep it sohc and "stock' apperaring.pistons size?valve size?spring rate?cam?any help b appriciated.thanks larry
#2
#3
#4
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
is this car an auto or a manual? my advice would be to swap out the pistons for higer compression pistons plane the heads as otto said and get some crane cams and springs. you can also get a 95 cam, which has a bit more aggresive lift. and you can block off the EGR which won't gain you any HP but will keep the TB cleaner.
#6
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
www.modernperformance.com they will have the supplies you need. or you can shop around and find what you need at possably a better price. also you may be able to use a solid motor mount on the front, and a solid bobble strut on the rear. that way you can get the power to the tires right away.
Last edited by DOHCgarrett t3; 05-27-2010 at 03:56 PM.