1st Gen Neon 1995 through 1999 Neons

clutch and ecm info

Thread Tools
 
Search this Thread
 
  #1  
Old 08-28-2012, 08:46 AM
#92 racing's Avatar
#92 racing
#92 racing is offline
Registered User
Thread Starter
Join Date: Aug 2012
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default clutch and ecm info

I have a 1998 dohc neon and i want to install a transmission out of a 1995 sohc neon both are std. The main reason for the swap is the gear rato, i cyrcle track race the car and need my rpms lower in 2nd gear. Are the transmissions interchangeable? Are the clutches interchangeable?
Also i bought i mopar performance ecm p5007033 will this work with my 1998 dohc std trans?
 
  #2  
Old 08-28-2012, 09:40 AM
I_Ride_Neon's Avatar
I_Ride_Neon
I_Ride_Neon is offline
Record Breaker
Join Date: Nov 2007
Location: Dubuque, Iowa
Posts: 2,004
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes a sohc trans will bolt right up. They offered 2 clutches in the neons. Modular, and non modular. Modular uses the ATX flywheel and bolts, the non modular uses its own flywheel and bolts. Both will work fine with either trans. So if you swap everything from yours you will be good to go. Not sure on the ECU but I do know 98-99 are the same. Someone did a write up with the differences so you can repin it to work with other years.
 



Quick Reply: clutch and ecm info



All times are GMT -4. The time now is 03:24 PM.