1st Gen Neon 1995 through 1999 Neons

enging code P0422

Old Feb 10, 2006 | 04:27 AM
  #1  
tspeed109's Avatar
tspeed109
Thread Starter
|
Professional
Joined: Jul 2005
Posts: 163
Likes: 4
From: Lincoln, NE
Default enging code P0422

I keep getting the engine code PO422
Advanced auto parts told me that it was the oxygen sensor in bank 1 and I have replaced it.
I bought a code reader actron OBDII reader and it says code PO422 Main Catalyst Below Threshold (Bank 1)
I have replaced the oxygen sensor and erased codes but light still comes on.
Any help will be greatly appreciated. When I reset the light and drive The light seems to only come on when I am on the interstate going 75mph. When I am in town light never comes on.
I have just replaced the muffler because it had a big hole in it and noticed that the tailpipe seems to be loose at the exhaust manifold. Could a leak at the connection to the manifold cause this? A mechanic told me that it could be my gas cap.
 
Reply
Old Feb 10, 2006 | 08:17 PM
  #2  
casper's Avatar
casper
Legend
Joined: Jul 2004
Posts: 9,606
Likes: 0
From:
Default RE: enging code P0422

Gas cap could do it. Did you replace both 02 sensors?
 
Reply
Old Feb 12, 2006 | 04:24 AM
  #3  
tspeed109's Avatar
tspeed109
Thread Starter
|
Professional
Joined: Jul 2005
Posts: 163
Likes: 4
From: Lincoln, NE
Default RE: enging code P0422

I have only replaced the one before the catalytic converter. Do you suggest I replace both?
My gas mileage is good. The check engine light only comes on when I drive at higher speeds.
I have a exhaust leak where the pipe connects to the exhaust manifold.
I am not sure if this is the problem or not.
thanks for your help
Troy
 
Reply
Old Feb 12, 2006 | 04:35 AM
  #4  
casper's Avatar
casper
Legend
Joined: Jul 2004
Posts: 9,606
Likes: 0
From:
Default RE: enging code P0422

Depending on how bad the leak is that could be the problem. I would fix any obvious problems 1st and go from there.
 
Reply
Old Feb 15, 2006 | 08:06 AM
  #5  
RadarLove's Avatar
RadarLove
Record Breaker
Joined: Mar 2005
Posts: 1,205
Likes: 0
From:
Default RE: enging code P0422

P0422 is cat efficiency failure. Your O2 sensors are reading correctly and telling you that the cat is dead. A leak upstream of the cat is going to lean out the mixture, making the car run richer than it should, which might be giving a false indication (but probably not). That would be the first thing to take care of. If the cat efficiency code comes back, replace the cat. I got great mileage on mine with that code, all the way up until chunks started coming out of the muffler...

Best of luck!
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:03 AM.