reproduction interior trim 72-93 dodge full size
#1
reproduction interior trim 72-93 dodge full size
We are making reproduction interior trim for the 1972-1993 dodge full size truck. Put the 1993 LE interior in any 72-93 dodge.
these interior trim parts have been discontinued from mopar for years now get nice fiber glass reproduction parts that can be painted to match any color
we just finished the first part the one under the back window all the others to follow very soon
the parts are made of fiber glass ( 2 layers for strength) it has the correct grain and fits like a glove.
As you can see in the pictures. the dark gray is the factory part the light gray is our repo. part
these interior trim parts have been discontinued from mopar for years now get nice fiber glass reproduction parts that can be painted to match any color
we just finished the first part the one under the back window all the others to follow very soon
the parts are made of fiber glass ( 2 layers for strength) it has the correct grain and fits like a glove.
As you can see in the pictures. the dark gray is the factory part the light gray is our repo. part
The following users liked this post:
Brax_Ludlow_Tunes (02-14-2020)
#2
RE: reproduction interior trim 72-93 dodge full size
How about some of the cool looking late 70s door panels with the woodgrain inserts ? The 80s peices are square and boxy with no style. All of 'em I've found around here are sunbaked.
#4
RE: reproduction interior trim 72-93 dodge full size
Check some of the Little Red Wagon & Warlock sites. Seen a pair of black NOS panels for sale $100 each but missed 'em by about an hour. Been a while,can't remember the site.
If you start making repops I'll buy a set. I've got the inserts,pretty ragged so I covered 'em in black cloth to match the seats. After more consideration the panels were just too shot to use. The tops were sun rotted. How cherry a set do you need? All texture etc. mint?
If you start making repops I'll buy a set. I've got the inserts,pretty ragged so I covered 'em in black cloth to match the seats. After more consideration the panels were just too shot to use. The tops were sun rotted. How cherry a set do you need? All texture etc. mint?
#5
RE: reproduction interior trim 72-93 dodge full size
When will you have all the peices ready and how much will you sell them for. I know im interested. I was just at the junk yard and about to pull some from a truck there but they didnt have all the parts to it, but I would like to get them since my truck does not have them and I would like the inside of the truck to be more quite.
#6
RE: reproduction interior trim 72-93 dodge full size
ORIGINAL: lugnuts
Check some of the Little Red Wagon & Warlock sites. Seen a pair of black NOS panels for sale $100 each but missed 'em by about an hour. Been a while,can't remember the site.
If you start making repops I'll buy a set. I've got the inserts,pretty ragged so I covered 'em in black cloth to match the seats. After more consideration the panels were just too shot to use. The tops were sun rotted. How cherry a set do you need? All texture etc. mint?
Check some of the Little Red Wagon & Warlock sites. Seen a pair of black NOS panels for sale $100 each but missed 'em by about an hour. Been a while,can't remember the site.
If you start making repops I'll buy a set. I've got the inserts,pretty ragged so I covered 'em in black cloth to match the seats. After more consideration the panels were just too shot to use. The tops were sun rotted. How cherry a set do you need? All texture etc. mint?
itsrname2 we are shooting for $200.00- $250.00 for the hole set
both rockers
both a-pillers
both over the door parts
both rear corners
over the wind shield
over and under the back glass
#7
RE: reproduction interior trim 72-93 dodge full size
that is definitely worth it. i will be interested in these at some point - right now i am just trying to get it on the road and get the body work done first. interior will be last, but will be done. base model 89 so no plastic to speak of except door panels. and i need them too...
Trending Topics
#8
RE: reproduction interior trim 72-93 dodge full size
Yup, I think this will be a great product once finished. I have a bare bones 1985 D100 with crappy door panels, and I am very much looking forward to the complete set.
#9
RE: reproduction interior trim 72-93 dodge full size
I am looking for door panels to mold now both early and later style.On the later style would you want the full legnth or the shorter style
#10
RE: reproduction interior trim 72-93 dodge full size
ORIGINAL: 4406rr
I am looking for door panels to mold now both early and later style.On the later style would you want the full legnth or the shorter style
I am looking for door panels to mold now both early and later style.On the later style would you want the full legnth or the shorter style