Rear end confusion
Joined: Mar 2008
Posts: 35
Likes: 0
From:
RE: Rear end confusion
heres the low down on it according to the casting number on the housing...
Castings: 2852905, 3723598, 3723599
8.25 Chrysler(mopar) Rear End
Info: 1 5/8 pinion, 57.6" wide, 10 bolt cover, 55.6" width (flange to flange) / 51.4 housing flange to flange / 43.02 spring seat center to center.4/20/83 KD46 represents your unit came out of a 80's model dodge diplomat (possible police car) check it for (positraction/suregrip)
it is a goodrear end but not heavy duty.
I hate to post this here but my earlier post in this spot wasinaccurate due to personal error.in other words i was wrong.hopefully this info will help you......
Castings: 2852905, 3723598, 3723599
8.25 Chrysler(mopar) Rear End
Info: 1 5/8 pinion, 57.6" wide, 10 bolt cover, 55.6" width (flange to flange) / 51.4 housing flange to flange / 43.02 spring seat center to center.4/20/83 KD46 represents your unit came out of a 80's model dodge diplomat (possible police car) check it for (positraction/suregrip)
it is a goodrear end but not heavy duty.
I hate to post this here but my earlier post in this spot wasinaccurate due to personal error.in other words i was wrong.hopefully this info will help you......
Thread Starter
Joined: Apr 2008
Posts: 25
Likes: 0
From:
RE: Rear end confusion
OK - I just got out from under the truck. There is no tag on the rear, just some numbers
Bottom of housing
(chrysler symbol) 48674
3723599
Bottom of housing, parallel to cover
KD46
4 (20) 83
(pictures attached)
[IMG]local://upfiles/87633/7F834EB067134681A7AF5B3DCC829E53.jpg[/IMG]
Bottom of housing
(chrysler symbol) 48674
3723599
Bottom of housing, parallel to cover
KD46
4 (20) 83
(pictures attached)
[IMG]local://upfiles/87633/7F834EB067134681A7AF5B3DCC829E53.jpg[/IMG]
