1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

a little help =]

Thread Tools
 
Search this Thread
 
Old Jan 29, 2009 | 12:48 AM
  #11  
Nasty Nate's Avatar
Nasty Nate
Amateur
Joined: Jan 2009
Posts: 41
Likes: 0
Default

Its hard to see but the top left of the picture describes what it is. California and High altitude, for that particular img. I have a 22" wide screen so for me its easy to see.
 
Reply
Old Jan 29, 2009 | 12:58 AM
  #12  
charlie1935's Avatar
charlie1935
Record Breaker
Joined: Mar 2004
Posts: 1,977
Likes: 1
From: DuQuoin,IL.
Default

Originally Posted by nemesis_SS
wow alldata is effing sweet. i see the first image there showing smog pump even on an 87...Could have been California only. who knows.
My 87 D 100 has the air pump and is not a california truck. Got it new in Illinois.
 
Reply
Old Jan 29, 2009 | 07:31 PM
  #13  
nemesis_SS's Avatar
nemesis_SS
All Star
Joined: Jan 2008
Posts: 861
Likes: 2
From:
Default

wierd. maybe then those manifolds are not original
 
Reply
Old Jan 29, 2009 | 09:08 PM
  #14  
charlie1935's Avatar
charlie1935
Record Breaker
Joined: Mar 2004
Posts: 1,977
Likes: 1
From: DuQuoin,IL.
Default

Could it possibly vary due to the gross weight rating of the truck? At one time I believe that a truck rated at 6100 lbs. or more didn't have as strict emission requirements as lighter duty ones.
 

Last edited by charlie1935; Jan 30, 2009 at 11:56 PM.
Reply
Old Jan 30, 2009 | 10:24 PM
  #15  
88dakv6's Avatar
88dakv6
Thread Starter
|
Rookie
Joined: May 2008
Posts: 55
Likes: 0
Default

thanks for the pics from alldata i have access to them too, i just wanted some real life pics for the little stuff they dont show you on alldata =]

and no, i dont think the manifolds on my truck are the ones it came with but o well, i will piece it together, i might even put a new intake later on

thanks all for the help i will be finishing the engine pretty soon,

i need to get some pictures so yall can see where im at!

Thanks again!
 
Reply
Old Jan 30, 2009 | 10:30 PM
  #16  
88dakv6's Avatar
88dakv6
Thread Starter
|
Rookie
Joined: May 2008
Posts: 55
Likes: 0
Default

I have not been working on my truck because my dad just bought a 98 1500 ram that needs TONS of attention, I'm replacing the rod bearings i should be done tomorrow i did four of them this afternoon...
I have also done a full tune up including spark plugs, wires, rotor, cap, pcv valve, oil, air filter but thinking of getting him an aftermarket intake of ebay b/c his is trashed, also chenged the oil on the diff and installed a new gasket it was leaking pretty bad....

I just love working on trucks! =]
 
Reply




All times are GMT -4. The time now is 07:46 AM.