1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

1993 dodge w350 pcm

Thread Tools
 
Search this Thread
 
Old Sep 5, 2009 | 06:25 PM
  #1  
gavinladut's Avatar
gavinladut
Thread Starter
|
Registered User
Joined: Sep 2009
Posts: 13
Likes: 0
Default 1993 dodge w350 pcm

i have a 1993 dodge with a 360 and auto tranny my pcm is acting.will the pcm work from a 1995 with the same motor and tranny
 
Reply
Old Sep 6, 2009 | 07:57 AM
  #2  
SEAL's Avatar
SEAL
Champion
Joined: Mar 2009
Posts: 2,639
Likes: 4
From: Bent Mountain Va
Default

Each year, including 1993, vehicles of the same year, same engine, and same tranny used several different PCMs. The only way to know if a swap will work is to compare the part numbers. The part numbers are on the outside of each PCM.
 
Reply
Old Sep 8, 2009 | 12:59 AM
  #3  
Hahns5.2's Avatar
Hahns5.2
Record Breaker
Joined: Mar 2009
Posts: 2,181
Likes: 3
From: Battle Ground WA
Default

I replied to your thread on Pirate4x4 so I'll post it here too.

I know you can on the Dakotas, not sure if the generation change between 93 and 94 Rams changes anything. The Mopar PCM in my 5.2 Dakota is for 94-95 5.9 auto RAMs and the guy I bought it from was using it in his 93 Dakota without any problems if that helps.
 

Last edited by Hahns5.2; Sep 8, 2009 at 01:02 AM.
Reply




All times are GMT -4. The time now is 01:27 AM.