'90 W150 New Floor - How to Seal?
Thread Starter
|
Registered User
Joined: Jul 2010
Posts: 30
Likes: 0
'90 W150 New Floor - How to Seal?
My 90 W150 needed a new driver side floor pan:
http://picasaweb.google.com/lh/photo...eat=directlink
I spot welded a new floor pan in that i bought from Mill supply. Went pretty well. Looks like crap, but its in there, and it will be covered with the vinyl i took out, once i clean it.
http://picasaweb.google.com/lh/photo...eat=directlink
My question is, what should I seal this with. Both inside the cab, and underneath? Im thinking about POR15 for the underside, and 3M drip-check sealer around the seams for the top, followed by a coat of paint.
http://picasaweb.google.com/lh/photo...eat=directlinkI spot welded a new floor pan in that i bought from Mill supply. Went pretty well. Looks like crap, but its in there, and it will be covered with the vinyl i took out, once i clean it.
http://picasaweb.google.com/lh/photo...eat=directlinkMy question is, what should I seal this with. Both inside the cab, and underneath? Im thinking about POR15 for the underside, and 3M drip-check sealer around the seams for the top, followed by a coat of paint.
