I know this is kinda in the wrong forum, but I am not having much luck in the classifieds, hopefully I casn get more views here

I need a STOCK pitman are for my 1988 Dodge Ram, paypal ready, just PM me if you have one, thanks.

Hopefully a Mod will leave this up for a while...please

 

why cant you use a stock replacement from MOOG???

 

I went to the parts store and they said they don't sell them...they have a pitman arm for a ram 50 because it have a built in ball joint, also they sell a drag link... the pitman arm for a w100 w150 ram is not a wear item, but if you can find a moog pitman arm let me know

 

ok, i did not know it was a 4x4.
so its the curved solid metal peice on the driver side,with 2 bolt holes in one end,and one hole in the other end, is this the part you need???

 

my mistake,it has only 1 hole in each end,sorry. been a while since i worked on a 4x4. thank you

 

Yeah thats it.. my issue now is that y truck is lifted 3 in. and has a 4in drop pitman.. this was done a very long time ago.. it has bumpsteer bad....

taking a close look at it and reading what some other people have done is to go back to the stock drop arm for anything less then 4in.. should have solve or make my bumpsteer less agressive.

 

yea, unless someone has one laying around your best bet is your local pick and pull,u pull it, bone yard, etc..
i would say even a dealer,but probably no longer available.
your local DODGE dealer can tell you if any dealer in the USA has one. good luck with it...