1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

1991 Ram 4x4

Thread Tools
 
Search this Thread
 
Old Nov 20, 2011 | 06:44 PM
  #1  
khbeo's Avatar
khbeo
Thread Starter
|
Amateur
Joined: Jun 2009
Posts: 26
Likes: 0
Default 1991 Ram 4x4

Just picked up a 1991 Ram 4x4, 318 for my son. Not too bad for 1k with 135k on her. 4in sus lift, fitted with 35's. But there are alot of vacuum line plugged or sitting free.

Any where to find a diagram of the lines?
 
Reply
Old Nov 21, 2011 | 12:11 AM
  #2  
Comrade General's Avatar
Comrade General
Captain
Joined: Apr 2011
Posts: 514
Likes: 0
From: washington
Default

Got any pics?
 
Reply
Old Nov 21, 2011 | 06:18 AM
  #3  
SEAL's Avatar
SEAL
Champion
Joined: Mar 2009
Posts: 2,639
Likes: 4
From: Bent Mountain Va
Default

There is usually a sticker under the hood for the vacuum line routing. 88-91 had the same vacuum line setup if your sticker is missing. Haynes manual #30040 (912) has the diagram in it. Chiltons manual #8166 also has it. If my scanner worked I would post it . Sorry.
 

Last edited by SEAL; Nov 21, 2011 at 06:26 AM.
Reply




All times are GMT -4. The time now is 01:24 AM.