DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   1st Gen Ram Tech (https://dodgeforum.com/forum/1st-gen-ram-tech-63/)
-   -   How to remove AC from 89 Dodge W 150 318 motor (https://dodgeforum.com/forum/1st-gen-ram-tech/341187-how-to-remove-ac-from-89-dodge-w-150-318-motor.html)

nmscuba 11-07-2012 10:55 AM

How to remove AC from 89 Dodge W 150 318 motor
 
I have a question I hope someone can help me with. I have a 1989 Dodge W150 with a 318 engine and AC.

My AC unit is bad so I need to remove it. However the drive belts for the Alternator run off the AC down to the crank.

Is there a replacement idler pully available to take the place of the AC unit? I have not been able to find one after market or though the dealer

Also what did Dodge use for the same vehicle with NO AC??

Doe anyone have any pictures of their 89 dodge with a 318 and No AC? so I can see how its running the 2 belts?

I appreciate any help you can give me

Thank you

jasonw 11-09-2012 10:42 PM

https://dodgeforum.com/forum/dodge-r...s-section.html

sls001 11-09-2012 11:07 PM

If you check out your local pick-a-parts you might be able to find the idler that fits where the AC compress goes. It bolts to the same brackets and in the same location as the compressor.

Check dodge trucks, ramchargers, and vans 1988-91

nmscuba 11-10-2012 06:58 AM


Originally Posted by sls001 (Post 2904414)
If you check out your local pick-a-parts you might be able to find the idler that fits where the AC compress goes. It bolts to the same brackets and in the same location as the compressor.

Check dodge trucks, ramchargers, and vans 1988-91

I did check and found it :-) Got everything installed. Thank you for the help

mark38090 01-06-2020 09:12 PM

Went to upullit today and not a single vehicle that wasn't serpentine belt setup.


All times are GMT -4. The time now is 08:35 PM.


© 2024 MH Sub I, LLC dba Internet Brands