When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1st Gen Ram Tech'93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
New here so I will show mine. 1984 d150 prospector 5.2l. 2wd. Bought it from the original owner while I was stationed in North Carolina. Just had it repainted and if you look at the driver fender the ram logo and the square emblem are flipped. As soon as I get some goo gone I will place them in their correct location.
New here so I will show mine. 1984 d150 prospector 5.2l. 2wd. Bought it from the original owner while I was stationed in North Carolina. Just had it repainted and if you look at the driver fender the ram logo and the square emblem are flipped. As soon as I get some goo gone I will place them in their correct location.
Originally Posted by 00sidekick00
First first gen
Those are both sweet rides. I really dig the wheels on Vanilla Gorilla's rig.
I just went on americanracing.com and you're right about the ansen sprints. If I were to do an aftermarket wheel those would probably be my 1st choice. I just really like the slot mag look.
Here is my 87 W-150, 360, automatic, I picked it up for $400. It had thrown a fan blade and the imbalance took out the water pump. The previous owner told me the engine was tired and needed to be replaced, well, I had it back on the road in a day and drove it for 3 years before I replaced the engine with a short block
Here is my 87 W-150, 360, automatic, I picked it up for $400. It had thrown a fan blade and the imbalance took out the water pump. The previous owner told me the engine was tired and needed to be replaced, well, I had it back on the road in a day and drove it for 3 years before I replaced the engine with a short block
I really like the look of your truck. Especially like the style of cap. I don't know if you had it loaded down but it has a reverse rake in the pic. Might consider an add-a-leaf to correct it. I used to run a Leer cap on my Ranger and I used one plus a Hellwig overload spring since I usually had it loaded down.