I bought an '85 D150 with 225 and 904 that is missing the throttle pressure linkage (aka transmission kickdown) from the bell crank to the Holley 1945 carburetor. Everything from the bell crank to the transmission is present, or I'd get the Lokar kit. Does anyone know the part number?


Does anyone have a good photo of this part ? I think I'll have to make this part as I have not been able to find a used part. A good photo would really help.

 

I would check over at http://www.slantsix.org/
Someone over there may have the info your looking for.

Dave

 

Slantsix.org is the first place I posted this question

 

THE FSM does not have a photo of the linkage, but it seems like a piece of heavy wire would work.

 

Check this article http://www.slantsix.org/articles/supersix/article.htm
click on the pics to enlarge

Dave

 

I found the OEM throttle pressure rod stuck under the fender.

 

My "new" 1985 short bed slant six truck with 904 needs a drive shaft, which I think is two piece. Will a drive shaft from a similar body truck with a 318 work?