1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

92 d150 ac

Thread Tools
 
Search this Thread
 
Old Jul 24, 2024 | 08:11 PM
  #1  
Jmitchell021's Avatar
Jmitchell021
Thread Starter
|
Registered User
Joined: Jul 2024
Posts: 3
Likes: 0
From: Arkansas
Default 92 d150 ac

Installing a aftermarket electric fan, the green wire needs to hook to the positive side on the compressor clutch switch. Would that be the blue wire or the black one?
 
Reply
Old Jul 25, 2024 | 06:27 AM
  #2  
Moparite's Avatar
Moparite
Grand Champion
Loved
Community Favorite
10 Year Member
Community Builder
Joined: Feb 2015
Posts: 7,435
Likes: 578
Default

You need a relay to hook up to a "trigger" wire which would be the compressor wire. You can't run the fan off just the compressor wire. It should be the 87 wire after the relay.
 
Reply
Old Jul 25, 2024 | 07:35 PM
  #3  
Jmitchell021's Avatar
Jmitchell021
Thread Starter
|
Registered User
Joined: Jul 2024
Posts: 3
Likes: 0
From: Arkansas
Default

yes I have a relay just want the fan to run also when the ac is on. Its setup to turn on at 170 temp, but also has the wire to run to positive side of compressor that will turn on fan




Originally Posted by Moparite
You need a relay to hook up to a "trigger" wire which would be the compressor wire. You can't run the fan off just the compressor wire. It should be the 87 wire after the relay.
 
Reply
Old Jul 26, 2024 | 06:22 AM
  #4  
Moparite's Avatar
Moparite
Grand Champion
Loved
Community Favorite
10 Year Member
Community Builder
Joined: Feb 2015
Posts: 7,435
Likes: 578
Default

I assume you are adding this fan it's not replacing the stock fan correct?
 
Reply
Old Jul 28, 2024 | 07:57 AM
  #5  
Jmitchell021's Avatar
Jmitchell021
Thread Starter
|
Registered User
Joined: Jul 2024
Posts: 3
Likes: 0
From: Arkansas
Default

Yes it’s replacing the stock clutch fan
 
Reply




All times are GMT -4. The time now is 02:02 PM.