04 dakota 4.7 liter

I recently replaced the power steering pump. Unfortunately I can not get the reservoir to seal to the new pump. If anyone has any suggestions and maybe the proper place for the oring to seat in the the below picture I would be greatful.

thanks for any help

MaTT


[IMG]local://upfiles/60780/04E94E2A50514E1B8CCA7EE93DD868B9.jpg[/IMG]

 

better pic would be great, i havnt done it on my dak but i have on other vehicles...

 

Here is a better pic.

thanks again for any help

Matt

[IMG]local://upfiles/60780/27AF83C4CFEA4BF0B27A7EA20E949752.jpg[/IMG]

 

damn wish id had mine apart, the resovwar doesnt bolt to anything? is there a o ring? how is it held on

 

There is an oring that sits against the boss in the pump. The bracket that holds the reservoir to the pump has two bolts on one side and one on the other. The reservoid just doesn't seem to stay tight enough against the pump to make a complete seal. It will be fine for a short time but after some driving the drip, drip, drip will begin.