Potential 4.56 Gear Swap
Thread Starter
|
Veteran
Joined: Sep 2006
Posts: 405
Likes: 0
From:
Potential 4.56 Gear Swap
Ok I didnt want to make a new post, but i noticed sometimes people "flame" for reviving a 3 month old post...so
https://dodgeforum.com/m_790755/tm.htm
there is the old post so you cant say i didnt search
now my question is :
I have the 3.7 V6 4x4CC. So if i wanted to put the 4.56 gears in do i need to do the front as well as the rear and where can i get all the parts?
This is one job i will be doing myself lol
Edit: i currently have 245/70/16 on it right now but by the time i do the swap i should have 285/75/16s
https://dodgeforum.com/m_790755/tm.htm
there is the old post so you cant say i didnt search
now my question is :
I have the 3.7 V6 4x4CC. So if i wanted to put the 4.56 gears in do i need to do the front as well as the rear and where can i get all the parts?
This is one job i will be doing myself lol
Edit: i currently have 245/70/16 on it right now but by the time i do the swap i should have 285/75/16s
Champion
Joined: Feb 2005
Posts: 3,710
Likes: 2
From: Skagit County, WA
RE: Potential 4.56 Gear Swap
www.ringpinion.com
And yes, you need all of them. Have you done a gear swap before? Do you know how to do it? Setting the pinion correctly is crucial, it's not something you can half-*** if you want it to last. The fact that you're asking if you have to do front and rear leads me to believe you haven't done it before.
And yes, you need all of them. Have you done a gear swap before? Do you know how to do it? Setting the pinion correctly is crucial, it's not something you can half-*** if you want it to last. The fact that you're asking if you have to do front and rear leads me to believe you haven't done it before.