Custom QC Dakota Enclosure and seat 4sale
#1
#2
RE: Custom QC Dakota Enclosure and seat 4sale
The subs are not included. The seats shown is one of the seats you will be getting to replace the the 60 split. The enclosure was fairly pricey not including the time it took to track down the spare seat. My loss if your gain.I'm hoping to get $500 and I'll cover the shipping charges.
#3
RE: Custom QC Dakota Enclosure and seat 4sale
Here's the link to some of my trucks pics..
http://www.edesignaudio.com/edv2/userinstall.php?id=74
http://www.cardomain.com/ride/647612
Here's a video of the affects of the system..
http://www.realmofexcursion.com/vide...ns/12kv2.1.wmv
http://www.edesignaudio.com/edv2/userinstall.php?id=74
http://www.cardomain.com/ride/647612
Here's a video of the affects of the system..
http://www.realmofexcursion.com/vide...ns/12kv2.1.wmv
#6
RE: Custom QC Dakota Enclosure and seat 4sale
It wasn't much trouble. All I did was remove the 60 split, remove the jack holder, put the seat in and put a comple bolts in the current holes. You cannot bolt down all of the bolts but I'm pretty sure you can use 3. The seat held with no problems whatsoever. I had this system in my truck for a year or better. The enclosure has 2 terminals but one melted so I just wired my subs together using 1 terminal to get the final ohm load. I suggest maybe resanding some spots and refinishing due to it being store in my closet for the past year. It's not bad though. You can use it as is.