i have a 2000 dakota and i just bought a srt10 swap out of the srt10 ram. i have the complete swap motor, tranny, ecu, wiring ect. Wondering if anyone has ever done this swap or have any helpful info on this swap. any suggestions would be great. thanks

 

Yes one guy has. You may want to post in the 2nd gen dakota. I will move it there for you.

 

how mechanicaly incline are you?

you have the tools?
you have wiring diagrams?

 

Your going to have to either move the firewall back, or do some HEAVY mods to the front end radiator area to make the motor fit. The trans isn't much of a problem as long as you have the ecu to run it.

 

LoudPedal, how much do I have to pay you for a folder of your signatures?

 

Its called google. He can't get any anywhere else.

 

i am very mechaniclly inclinded. we have a shop in santa ana, ca. called power pro. We specialized in honda and acura but have been into cars since we were kids. i have heard of few people doing this swap and i knoe it wont be a problem just wondering if anyone had any tips or tricks. as far as wiring goes that wont be a problem. i knoe part of the firewall needs to be cut to fit the tranny and i knoe that i need to use an electric water pump, fan due to space in the engine bay. just wondering if anyone that has accually done this swap could give me any info like what i should do with the motor mounts, what i need to do with the sterring since it will be in the way

 

ive searched everywhere on google and have had no luck. i found couple pictures of guys that have done the swap but they didnt really give any feed back

 

do you have the link to the guy that you seen do this?

 

how much do you got?

no google has ****ty picture sizes...i get mine from bodsforthemods.com

hit name on here is Jason1981