2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

dakota problems please help

Old Jun 2, 2010 | 05:24 PM
  #1  
speedfreakz's Avatar
speedfreakz
Thread Starter
|
Registered User
Joined: Jun 2010
Posts: 1
Likes: 0
Default dakota problems please help

i have a 97 dakota i just stopped running ,if it sits for a wial it will crank up and run for a little bit ten just start spitting and shut down .
i let it sit or two weeks then it crunk up and ran for about two days then the same thing .it wont even crank at all when it does this i have to leave it alone for a wial then crank it .?????????????????????????
 
Reply
Old Jun 2, 2010 | 05:32 PM
  #2  
dakota_raven's Avatar
dakota_raven
Record Breaker
Joined: Jan 2009
Posts: 1,627
Likes: 0
From: Texas
Default

clogged fuel filter or bad fuel pump or both!
 
Reply
Old Jun 4, 2010 | 12:30 PM
  #3  
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,923
Likes: 19
From: NM
Default

I will move this to the 2nd Generation Dakota sub-forum.
 
Reply
Old Jun 6, 2010 | 02:00 AM
  #4  
ManofKent's Avatar
ManofKent
Registered User
Joined: Feb 2010
Posts: 10
Likes: 0
From: Southern Oregon
Default

Had the same problem with a 99 Dakota 5.2 V8, turned out to be the cam position sensor. You can take it to an auto zone or ? They will read the code for you, they said the sensor was bad but didn't sell the part, so I got one at Napa cost $42. It's located under the rotor in the distributor, easy fix, just a little tight getting to it. I'm thinking the 3.9 is the same but I'm not positive. Hope this easy fix solves your problem.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:28 PM.