2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

new guy here and i have got a question about the wiring harness

Thread Tools
 
Search this Thread
 
Old Nov 3, 2010 | 02:09 PM
  #1  
lt1ironhead's Avatar
lt1ironhead
Thread Starter
|
Registered User
Joined: Nov 2010
Posts: 3
Likes: 0
Default new guy here and i have got a question about the wiring harness

I recieved a 99 dodge dakota 3.9l without a transmission. I have since installed a new transmission and i have no clue where this sensor wire goes. It is located on the end of the transmission harness next to the oxygen senor it has a round blue center and is kinda squarish in shape.
I know this is kinda vague, but its the best i can do at the moment

Thank you in advanced, I can get a pic of it if it is needed.


Steve
 
Reply
Old Nov 3, 2010 | 03:22 PM
  #2  
dodgeramguy85's Avatar
dodgeramguy85
Grand Champion
Joined: Mar 2008
Posts: 5,508
Likes: 7
From: Houtzdale,PA
Default

Im thinking it might be for a speed sensor.
 
Reply
Old Nov 3, 2010 | 03:29 PM
  #3  
lt1ironhead's Avatar
lt1ironhead
Thread Starter
|
Registered User
Joined: Nov 2010
Posts: 3
Likes: 0
Default

I though there were only two speed sensors. 1 at the tail shaft housing of the trans and the other in the rear end.
 
Reply
Old Nov 3, 2010 | 03:45 PM
  #4  
dodgeramguy85's Avatar
dodgeramguy85
Grand Champion
Joined: Mar 2008
Posts: 5,508
Likes: 7
From: Houtzdale,PA
Default

Oh sorry I thought you said at the end of the trans nevermind then lol but are you having any problems with the truck? There are a couple connectors on these trucks that go no where and I want to think I might also have a dead end by my cat ill go out and check.
 
Reply
Old Nov 3, 2010 | 03:54 PM
  #5  
lt1ironhead's Avatar
lt1ironhead
Thread Starter
|
Registered User
Joined: Nov 2010
Posts: 3
Likes: 0
Default

Ok thank you
 
Reply
Old Nov 3, 2010 | 03:58 PM
  #6  
dodgeramguy85's Avatar
dodgeramguy85
Grand Champion
Joined: Mar 2008
Posts: 5,508
Likes: 7
From: Houtzdale,PA
Default

I have nothing that ends by the cat only plug there is the one going to the o2 sensor there isnt even a harness over there then on my driver side there is a harness but that just goes to fuel pump lights and abs only harness that is close to my cat is the transfer case and thats for the 4x4 light.
 
Reply




All times are GMT -4. The time now is 08:11 AM.